Fluke 700HPPK is a powerful high-pressure pneumatic test pump kit designed to generate and precisely adjust pressures up to 21 MPa / 210 bar / 3,000 psi without requiring a nitrogen cylinder or another external pressure supply. The portable system combines a high-pressure pneumatic pump with a detachable calibration manifold, making it suitable for pressure calibration in the laboratory, workshop and directly in the field. Fluke
The Fluke 700HPPK is designed for technicians who need to calibrate pressure transmitters, analog and digital pressure gauges, pressure controllers, pilots and other pressure instruments at high pneumatic pressures. The pump can reach full-scale pressure in approximately 20 seconds with a 10 cm³ test volume, while the integrated fine-adjustment system allows pressure to be set with a resolution of 0.05% of reading. Fluke
Unlike hydraulic high-pressure pumps, the 700HPPK generates high pressure using gas. This avoids liquid contamination of pneumatic devices under test and eliminates the need to transport a pressurized gas cylinder to the calibration location. This is particularly advantageous in natural gas transmission and distribution, process industries, aerospace, defense and mobile calibration applications. Fluke
The complete 700HPPK includes both the high-pressure pump and the 700HPM calibration manifold. The manifold provides connections for the reference pressure gauge and device under test and incorporates pressure isolation, venting and fine adjustment. It can be quickly detached from the pump, allowing it to be used conveniently both on a workbench and in the field. Fluke
For a complete pressure calibration system, the Fluke 700HPPK can be combined with a Fluke 2700G Reference Pressure Gauge or a Fluke 700G Precision Pressure Gauge. The pump generates the pressure, while the selected digital reference gauge provides the traceable pressure indication used to evaluate the device under test. Fluke
europascal lists the Fluke 700HPPK within its Fluke Calibration pressure portfolio and supports professional users with pressure calibration equipment, service and calibration. Europascal For traceable calibration of reference gauges, pressure calibrators and other pressure measuring instruments, visit the europascal Calibration Service.
Your Benefits at a Glance
- Pneumatic pressure generation up to 21 MPa / 210 bar / 3,000 psi
- No nitrogen cylinder or external pressure source required
- High-pressure pump and calibration manifold in one kit
- Full-scale pressure generation in approximately 20 seconds with a 10 cm³ volume
- Fine pressure adjustment with 0.05% of reading resolution
- Maximum specified leak rate of 0.01% of reading with isolation valve closed
- Detachable calibration manifold
- Reference gauge and DUT connections
- Integrated isolation and venting functions
- Quick-change reference gauge connection
- No PTFE tape required for reference gauge changes
- No special tools required for normal gauge changes
- 2 m high-pressure hose
- Multiple supplied pressure adapters
- 100 µm DUT contamination protection filter
- Desiccant filter on the pump inlet
- Portable and rugged construction
- Stable operation on different surfaces
- Collapsible feet
- Integrated carrying handle
- Canvas carrying bag included
- Suitable for laboratory and field calibration
- Compatible with Fluke 2700G reference gauges
- Compatible with Fluke 700G precision pressure gauges
High Pneumatic Pressure up to 210 bar
The defining capability of the Fluke 700HPPK is pneumatic pressure generation up to:
21 MPa
210 bar
3,000 psi. Fluke
Generating pressures of this magnitude pneumatically is particularly useful when the device under test should not be contaminated with oil or another hydraulic fluid.
Many conventional handheld pneumatic pumps operate at significantly lower pressures. Fluke states that the 700HPPK covers at least five times more workload than standard-range pneumatic pumps. Fluke
This extends portable pneumatic calibration into pressure ranges that would otherwise frequently require hydraulic equipment or an external high-pressure gas supply.
No External Gas Cylinder Required
The Fluke 700HPPK generates pressure manually and does not require a nitrogen bottle or another external pressure source. Fluke
This simplifies field calibration considerably.
A technician does not need to transport a high-pressure cylinder, pressure regulator and associated equipment to the measurement location. The complete high-pressure source is contained within the portable pump system.
This can reduce the amount of equipment required for mobile calibration and avoids some of the handling requirements associated with compressed-gas cylinders.
Fast Pressure Generation
The Fluke 700HPPK is designed to generate high pneumatic pressure efficiently.
Fluke currently specifies approximately:
20 seconds to reach full scale with a 10 cm³ test volume. Fluke
The actual time required in a calibration setup depends on the connected test volume, tubing and device under test.
Nevertheless, the high-pressure pump is specifically designed for applications in which pressures up to 3,000 psi must be generated repeatedly without an external supply.
Precise Fine Adjustment
Generating pressure is only one part of calibration.
The pressure must also be adjusted accurately to the required calibration point.
The calibration manifold included with the Fluke 700HPPK incorporates a fine-adjustment mechanism. Fluke specifies a fine adjustment resolution of:
0.05% of reading. Fluke
This allows the operator to generate the approximate pressure with the pump and then make smaller adjustments using the manifold.
The combination is particularly useful when approaching defined calibration points on analog gauges, digital pressure gauges or pressure transmitters.
Detachable Calibration Manifold
The 700HPPK differs from the pump-only 700HPP by including the high-pressure calibration manifold.
The manifold provides functions required for comparison calibration, including:
- Pressure adjustment
- Reference gauge connection
- Device-under-test connection
- Pressure isolation
- Controlled venting
The manifold attaches to and detaches from the pump using quick detent pins. Fluke
This modular design makes it possible to position the adjustment manifold conveniently during calibration and simplifies packing the system for transportation.
Quick Reference Gauge Changes
The reference gauge connection uses a:
1/4-inch NPT quick-connect arrangement.
Fluke highlights that reference pressure gauges can be exchanged without requiring PTFE sealing tape or additional tools. Fluke
This is particularly useful for calibration technicians who work across several pressure ranges.
For example, one Fluke 2700G reference gauge may be used for lower pressures and another range may be installed for higher-pressure calibration work.
Reducing the time required to change reference gauges improves efficiency and reduces unnecessary handling of threaded pressure connections.
Complete Calibration System with Fluke 2700G
The Fluke 700HPPK can be combined with the Fluke 2700G Reference Pressure Gauge to create a high-accuracy portable calibration system.
A typical arrangement is:
Fluke 700HPPK → Fluke 2700G → Device Under Test
The 700HPPK generates and finely adjusts the pneumatic pressure.
The 2700G measures the pressure as the reference.
The device under test is exposed to the same pressure and its reading can then be compared with the reference value.
Fluke specifically recommends the 2700G and 700G pressure gauges for complete 700HPPK calibration solutions. Fluke
Combination with Fluke 700G
The Fluke 700G Precision Pressure Gauge can also be used with the pump kit.
This provides a robust field-oriented calibration system for pressure gauges, transmitters and other pneumatic devices.
The appropriate reference gauge should always be selected according to the pressure range, required measurement uncertainty and intended device under test.
The 700HPPK itself is a pressure generator and comparator system; its metrological performance as a complete calibration setup therefore also depends on the selected reference instrument.
Contamination Protection
Contamination can create significant problems in high-pressure pneumatic systems.
The Fluke 700HPPK incorporates protection on both the pump inlet and device-under-test side.
Fluke specifies:
Desiccant filter at the inlet
and:
100 µm DUT contamination protection filter. Fluke
The desiccant helps protect the system from unwanted moisture, while the DUT filter reduces the risk of contamination entering the calibration manifold from a connected instrument.
This is particularly useful when calibrating pressure equipment that has previously been used in industrial processes.
High-Pressure Hose and Adapters
The 700HPPK includes a:
2 m / 6.5 ft high-pressure hose.
A range of test-port adapters is also supplied. Fluke
Available kit configurations include:
700HPPK-NPT
700HPPK-BSP
700HPPK-MET.
Depending on the selected version, supplied adapters support common NPT, BSP and metric pressure connections. Fluke
This enables the system to be connected to a broad variety of pressure gauges, transmitters and other devices under test.
Rugged Portable Design
The Fluke 700HPPK is designed for both laboratory and field use.
The complete kit weighs approximately:
7.2 kg / 15.8 lb.
Dimensions are approximately:
66 × 30.5 × 13 cm. Fluke
The design incorporates collapsible feet and an integrated handhold.
Fluke specifically emphasizes that the unit can be operated on different surfaces and does not require a perfectly flat laboratory bench. Fluke
A canvas carrying bag is included, making the complete system easier to transport between calibration locations.
Technical Data
| Feature | Fluke 700HPPK |
|---|---|
| Product type | Pneumatic Test Pump Kit |
| Maximum working pressure | 21 MPa |
| Maximum pressure | 210 bar |
| Maximum pressure | 3,000 psi |
| External pressure supply | Not required |
| Time to full scale, 10 cm³ volume | Approx. 20 s |
| Fine adjustment resolution | 0.05% of reading |
| Maximum leak rate with isolation valve closed | 0.01% of reading |
| Reference gauge connection | 1/4 NPT quick connect |
| DUT contamination filter | 100 µm |
| Pump inlet protection | Desiccant filter |
| Pressure hose | 2 m / 6.5 ft |
| Kit weight | Approx. 7.2 kg |
| Dimensions | Approx. 66 × 30.5 × 13 cm |
| Versions | NPT, BSP, Metric |
| Recommended reference gauges | Fluke 2700G, Fluke 700G |
These specifications are based on current official Fluke product information. Fluke
Scope of Delivery
Depending on the selected NPT, BSP or metric configuration, the Fluke 700HPPK includes:
- High-pressure pneumatic pump
- Calibration manifold
- Canvas carrying bag
- High-pressure pneumatic quick service kit
- Replacement pump seals
- Dry-Pac refill
- Silicone grease
- High-pressure hose
- Test-port adapters Fluke
This scope of delivery provides the essential components needed to build a portable high-pressure pneumatic calibration system when combined with a suitable reference pressure gauge.
Typical Applications
The Fluke 700HPPK is suitable for:
- High-pressure pneumatic calibration
- Digital pressure gauge calibration
- Analog pressure gauge calibration
- Pressure transmitter calibration
- Pressure sensor testing
- Pressure controller verification
- Pilot calibration
- Natural gas transmission applications
- Natural gas distribution
- Gas custody-transfer instrumentation
- Process industry
- Aerospace applications
- Defense applications
- Field pressure calibration
- Laboratory pressure calibration
- Workshop calibration
- Comparison calibration
- Pressure metrology
Fluke specifically identifies natural gas transmission and distribution, process applications, aerospace and defense among the target industries for the 700HPPK. Fluke
Calibration and Service by europascal
europascal offers professional pressure calibration and service capabilities and lists the Fluke 700HPPK within its Fluke Calibration product portfolio. europascal is also an authorized Fluke Calibration service center for pressure and flow products in the EMEA region. Europascal
For calibration of the reference pressure gauge used together with the pump kit, visit the europascal Calibration Service.
europascal’s accredited pressure laboratory covers an exceptionally broad pressure range from 1 Pa to 10,000 bar, depending on pressure type and calibration method. Europascal
Important Safety Information
Fluke currently publishes a safety recall for the 700HPM calibration manifold used in 700HPPK kits. The recall affects 700HPM manifolds in 700HPPK-MET, 700HPPK-NPT and 700HPPK-BSP kits with serial numbers below 6516XXX, unless the manifold has already been reworked and carries the “CO-0000582” recall correction label. Fluke instructs owners of affected, unreworked products to stop using them and arrange the required repair. Units with serial numbers 6516XXX and above are not affected. Fluke
This safety information should be checked for existing equipment before the pump kit is operated.
Why Choose the Fluke 700HPPK?
The Fluke 700HPPK fills an unusual gap between conventional portable pneumatic hand pumps and large stationary high-pressure systems.
It can generate 210 bar / 3,000 psi pneumatically without requiring a compressed-gas cylinder or hydraulic fluid. This makes it particularly attractive when high pressure is required but contamination of the device under test with oil must be avoided.
The detachable manifold provides fine pressure adjustment, isolation, venting and convenient connections for both the reference gauge and device under test. Pressure can be adjusted with a resolution of 0.05% of reading, and a 10 cm³ volume can reach maximum pressure in approximately 20 seconds.
Integrated filtration and drying systems protect the pressure system, while the 2 m hose and supplied adapters provide flexibility when connecting different devices.
When combined with a Fluke 2700G or 700G reference pressure gauge, the 700HPPK becomes a complete portable comparison calibration system suitable for field, workshop and laboratory applications.
Its rugged construction, carrying bag and ability to operate on different surfaces make it especially useful for technicians who need high-pressure pneumatic capability directly at the installation site.
europascal can support users with suitable Fluke Calibration pressure equipment, reference gauges and traceable pressure calibration services.
Further products from Fluke Calibration can be found here. Europascal
Manufacturer information about the Fluke 700HPPK can be found on the official Fluke website.
