Fluke Calibration 717 is a precise, rugged and portable pressure calibrator designed for pressure measurement, transmitter calibration, pressure switch testing and maintenance applications in the field and laboratory. The instrument combines an internal pressure sensor with accurate mA measurement and a 24 V loop power supply, allowing technicians to test pressure transmitters and other process instrumentation with a single compact device.
Depending on the selected model, different internal pressure ranges are available. Fluke specifies an internal pressure measurement accuracy of 0.05% of full scale, while optional Fluke 700Pxx pressure modules extend pressure measurement capability up to 10,000 psi / 700 bar. The 717 also measures current from 0 to 24 mA with 0.015% accuracy and a resolution of 0.001 mA. Fluke
The compact design, straightforward push-button interface and robust protective holster make the Fluke Calibration 717 particularly suitable for technicians who require accurate pressure measurements directly at industrial installations. Zero, Min, Max, Hold and damping functions support efficient troubleshooting and calibration, while the integrated pressure switch test function automatically captures set, reset and deadband values. Fluke
For traceable calibration of pressure calibrators, gauges, sensors and other pressure measuring instruments, europascal offers professional services through the europascal Calibration Service. europascal provides DAkkS-accredited pressure calibration capabilities covering pneumatic and hydraulic pressure measurements and calibrates a wide range of pressure instruments from different manufacturers. europascal.de
Your Benefits at a Glance
The Fluke Calibration 717 combines pressure measurement and electrical process calibration functions in a compact handheld instrument.
Key benefits include:
- Internal pressure sensor
- Internal pressure measurement accuracy of 0.05% FS
- Multiple internal pressure ranges
- Pressure measurement up to 700 bar with optional 700Pxx modules
- 0 to 24 mA measurement
- mA accuracy of 0.015%
- 0.001 mA resolution
- Integrated 24 V loop power
- Simultaneous pressure and current measurement
- Pressure transmitter calibration
- Pressure switch testing
- Automatic capture of set, reset and deadband values
- Zero function
- Min and Max functions
- Hold function
- Damping function
- Eleven selectable engineering units
- Compatible with non-corrosive gases and liquids
- Compact handheld construction
- Clear 5-digit LCD
- Rugged protective holster
- Long battery life
- Suitable for field and laboratory applications
The Fluke 717 is designed to combine pressure and electrical measurements required for common process calibration tasks in one portable instrument. Fluke
Accurate Pressure Measurement
The Fluke Calibration 717 measures pressure using an integrated pressure sensor.
Fluke specifies an accuracy of:
0.05% of full scale
for the internal pressure measurement specification listed for the series. Fluke
This makes the 717 suitable for calibration, service and troubleshooting tasks involving pressure transmitters, pressure switches, gauges and other process instrumentation.
Depending on the selected model, the internal pressure range can be matched to the intended application.
Multiple Pressure Ranges
The Fluke Calibration 717 family is available in numerous versions covering low, medium and high pressures.
Current Fluke model listings include:
| Model | Pressure Range |
|---|---|
| Fluke 717 1G | -1 to 1 psi / approx. -68.9 to 68.9 mbar |
| Fluke 717 15G | -12 to 15 psi / approx. -0.85 to 1 bar |
| Fluke 717 30G | -12 to 30 psi / approx. -0.85 to 2 bar |
| Fluke 717 100G | -12 to 100 psi / approx. -0.85 to 7 bar |
| Fluke 717 300G | -12 to 300 psi / approx. -0.85 to 20 bar |
| Fluke 717 500G | 0 to 500 psi / approx. 34.7 bar |
| Fluke 717 1000G | 0 to 1,000 psi / approx. 69 bar |
| Fluke 717 1500G | 0 to 1,500 psi / approx. 103.4 bar |
| Fluke 717 3000G | 0 to 3,000 psi / approx. 207 bar |
| Fluke 717 5000G | 0 to 5,000 psi / approx. 345 bar |
| Fluke 717 10000G | 0 to 10,000 psi / approx. 690 bar |
The exact range and overpressure capability depend on the selected version. Fluke
This wide choice makes it possible to select a calibrator whose internal sensor is appropriately matched to the actual working pressure.
Pressure Measurement up to 700 bar with 700Pxx Modules
The capabilities of the Fluke Calibration 717 can be expanded using optional Fluke 700Pxx pressure modules.
Fluke specifies support for 29 pressure modules, providing ranges from approximately 2.5 mbar up to 700 bar. Differential, gauge and absolute pressure measurement options are available depending on the selected module. Fluke
This modular approach enables one calibrator to be used for a wider variety of pressure applications without requiring a separate handheld calibrator for every measuring range.
The optional pressure modules are particularly useful when pressure ranges outside the internal sensor range are required or when different pressure measurement types must be supported.
mA Measurement with High Accuracy
Pressure transmitters frequently convert the measured pressure into a standardized 4 to 20 mA electrical signal.
The Fluke Calibration 717 is designed specifically for these applications.
The current measuring range is:
0 to 24 mA
with a resolution of:
0.001 mA
and an accuracy of:
0.015% + 2 counts. Fluke
This allows the technician to measure the pressure input and electrical transmitter output using the same instrument.
Simultaneous Pressure and Current Measurement
One of the most useful features of the Fluke Calibration 717 is its ability to measure pressure and current simultaneously.
For a pressure transmitter calibration, a typical setup consists of:
Pressure source → Pressure transmitter → Fluke Calibration 717
The calibrator measures the applied pressure and the corresponding electrical output of the transmitter.
This makes the instrument particularly suitable for testing pressure-to-current transmitters, often referred to as P/I transmitters.
Fluke specifically identifies simultaneous pressure and current measurement as a key function of the 717. Fluke
Integrated 24 V Loop Power
The Fluke Calibration 717 provides an integrated:
24 V DC loop power supply.
This allows a two-wire pressure transmitter to be powered directly during calibration without requiring a separate external loop supply.
The calibrator can therefore:
- supply the transmitter
- measure its output current
- measure the applied pressure
within a compact calibration setup.
This reduces the number of additional devices required during mobile service work.
Pressure Switch Testing
The Fluke Calibration 717 includes a dedicated pressure switch test function.
The function can capture:
- Set point
- Reset point
- Deadband
of a pressure switch. Fluke
This is particularly useful for maintenance and calibration because the technician does not have to manually record the exact pressure at which the switch changes state.
The difference between switching and reset pressure can be evaluated directly as the switch deadband.
Error Percentage Calculation
For transmitter testing, the Fluke 717 also provides an error percentage calculation for mA measurements.
This function supports quick pass/fail decisions during process calibration. Fluke
Instead of manually converting every measured current value into percentage deviation, the instrument can simplify the evaluation of the transmitter output.
This is particularly useful when several calibration points must be checked in succession.
Zero, Min, Max and Hold Functions
The Fluke Calibration 717 provides several measurement functions to simplify daily calibration work.
These include:
Zero
for zeroing the pressure measurement.
Min
for recording the minimum measured value.
Max
for recording the maximum measured value.
Hold
for retaining a measured value on the display.
Damping
for stabilizing displayed values when pressure fluctuates. Fluke
These functions are especially helpful during troubleshooting and field measurements.
Eleven Engineering Units
The Fluke 717 supports eleven selectable engineering units. Fluke
This allows pressure readings to be displayed directly in the unit appropriate for the process or device under test.
The ability to switch units directly on the calibrator eliminates unnecessary manual conversions and simplifies international service and calibration work.
Suitable for Gases and Liquids
The internal pressure sensor of the Fluke Calibration 717 is suitable for:
non-corrosive gases and liquids. Fluke
Media compatibility must nevertheless be checked before connecting the calibrator to a process.
Aggressive or corrosive media should not be applied directly unless explicitly approved for the respective measuring configuration.
This is especially important in hydraulic or chemically demanding applications.
Compact and Rugged Field Instrument
The Fluke 717 is designed as a portable process calibration instrument.
Its dimensions are approximately:
201 × 98 × 52 mm
and its weight is approximately:
600 g including the protective holster. Fluke
The compact format makes the calibrator easy to carry between measurement locations.
Fluke also specifies resistance to electromagnetic interference as well as a dust- and splash-resistant construction. The protective holster provides additional mechanical protection and includes storage for test leads. Fluke
Clear 5-Digit LCD
Measurement values are shown on a clear:
5-digit LCD. Fluke
The digital display allows pressure and electrical measurements to be read conveniently during field and laboratory work.
Combined with the straightforward push-button interface, the design supports fast operation without complex menu navigation.
Battery-Powered Operation
The Fluke Calibration 717 uses a single:
9 V alkaline battery.
Battery-powered operation makes the calibrator independent of mains power during field work. Fluke
Fluke also highlights long battery life as one of the instrument’s practical advantages.
This is especially useful for technicians performing calibration and troubleshooting tasks at different locations throughout the working day.
Technical Highlights
| Feature | Fluke Calibration 717 |
|---|---|
| Product type | Pressure Calibrator |
| Internal pressure accuracy | 0.05% FS |
| Internal sensor models | Multiple ranges available |
| External pressure modules | Fluke 700Pxx |
| External module capability | Up to 10,000 psi / 700 bar |
| Number of compatible pressure modules | 29 |
| Current range | 0 to 24 mA |
| Current resolution | 0.001 mA |
| Current accuracy | 0.015% + 2 counts |
| Loop supply | 24 V DC |
| Pressure switch test | Yes |
| Engineering units | 11 |
| Functions | Zero, Min, Max, Hold, Damp |
| Pressure connection | 1/8 NPT female |
| Display | 5-digit LCD |
| Operating temperature | -10 °C to 55 °C |
| Maximum operating altitude | 3,000 m |
| Dimensions | 201 × 98 × 52 mm |
| Weight | Approx. 600 g with holster |
| Power supply | 9 V alkaline battery |
| Warranty | 3 years |
These specifications are based on the current official Fluke product information. Fluke
Typical Applications
The Fluke Calibration 717 is suitable for:
- Pressure transmitter calibration
- Pressure sensor testing
- Pressure switch calibration
- P/I transmitter calibration
- 4 to 20 mA transmitter testing
- Pressure measurement
- Process instrumentation maintenance
- Field calibration
- Laboratory calibration
- Preventive maintenance
- Troubleshooting
- Pneumatic pressure applications
- Hydraulic pressure applications with compatible media
- Quality assurance
- Industrial service
- Process control systems
Calibration by europascal
Reliable pressure calibration equipment should itself be calibrated at appropriate intervals.
europascal operates an accredited calibration laboratory and provides pressure calibration services for pressure controllers, pressure sensors, pressure gauges, digital gauges and other precision pressure instruments. The company’s published pressure calibration capabilities extend from 1 Pa to 10,000 bar, depending on pressure type and method. europascal.de
The Fluke Calibration 717 can therefore be integrated into an established calibration and service strategy through the europascal Calibration Service.
Why Choose the Fluke Calibration 717?
The Fluke Calibration 717 combines pressure measurement, mA measurement, 24 V loop power and pressure switch testing in one rugged handheld instrument.
With multiple internal pressure ranges, the calibrator can be selected specifically for the required application. Additional Fluke 700Pxx pressure modules extend its flexibility further and allow measurements up to 700 bar.
Its 0 to 24 mA input with 0.015% accuracy, simultaneous pressure and current measurement and integrated 24 V transmitter supply make the Fluke 717 particularly useful for pressure transmitter calibration.
The pressure switch test function simplifies the determination of set, reset and deadband values, while Zero, Min, Max, Hold and damping functions provide practical support during everyday measurement and maintenance work.
Its compact construction, protective holster and battery-powered operation make the Fluke 717 equally suitable for mobile field service and laboratory use.
europascal supplies and supports professional pressure calibration solutions and offers suitable calibration services for process and pressure measurement equipment. More information about the Fluke Calibration portfolio is available on the Fluke Calibration products at europascal.
