Fluke 2700G is a precise digital reference pressure gauge designed for professional pressure calibration, comparison measurements, laboratory use and mobile service applications. The series covers pressure ranges from 100 kPa / 1 bar up to 70 MPa / 700 bar, making it suitable for both pneumatic and hydraulic pressure calibration tasks. Fluke specifies an uncertainty of up to 0.02% of full scale, depending on the selected model and pressure direction
The Fluke 2700G is especially useful as a reference instrument in comparison calibration systems. It can be combined with Fluke Calibration pressure pumps such as the 700PTPK, 700HTPK, P5510, P5513, P5514 and P5515. This allows users to build portable or bench-top calibration systems for analog pressure gauges, digital pressure gauges, pressure transmitters and pressure sensors.
On the europascal website, the Fluke 2700G is presented as a precision reference pressure gauge for professional pressure calibration from -1 bar up to 700 bar / 10,000 psi, with nine available measuring ranges, 21 standard pressure units and a compact battery-powered design. europascal also highlights its suitability for laboratory, workshop and mobile calibration applications.
For reliable metrological traceability, the Fluke 2700G can be calibrated through the europascal Calibration Service. europascal also supports users in selecting the appropriate pressure range and assembling complete pneumatic or hydraulic calibration systems.
Your Benefits at a Glance
- Precise digital reference pressure gauge
- Nine available pressure ranges
- Pressure ranges up to 700 bar / 10,000 psi
- Bidirectional ranges for vacuum and positive gauge pressure
- High-pressure versions up to 20 MPa, 35 MPa and 70 MPa
- Uncertainty down to ±0.02% FS
- Vacuum uncertainty down to ±0.05% FS for bidirectional versions
- 21 standard pressure units
- One programmable custom pressure unit
- Adjustable sampling rate
- Adjustable damping
- Tare function
- Min and Max functions
- Configurable automatic power-off
- Remaining battery life indication
- 5.5-digit digital display
- 20-segment bar graph
- Compatible with pneumatic and hydraulic pressure generation systems
- Compatible with Fluke 700PTPK and 700HTPK pump kits
- Compatible with Fluke P5510, P5513, P5514 and P5515
- Compact handheld construction
- Battery-powered operation
- Suitable for mobile calibration
- Suitable for laboratory pressure calibration
- Suitable for comparison measurements
- Professional calibration service available from europascal
Nine Pressure Ranges up to 700 bar
The Fluke 2700G series includes nine pressure ranges, allowing the reference gauge to be matched closely to the required calibration workload.
Available models include:
| Model | Pressure Range |
|---|---|
| 2700G-BG100K | -100 to +100 kPa |
| 2700G-BG200K | -100 to +200 kPa |
| 2700G-BG700K | -80 to +700 kPa |
| 2700G-BG2M | -80 kPa to +2 MPa |
| 2700G-BG3.5M | -80 kPa to +3.5 MPa |
| 2700G-BG7M | -80 kPa to +7 MPa |
| 2700G-G20M | 0 to 20 MPa |
| 2700G-G35M | 0 to 35 MPa |
| 2700G-G70M | 0 to 70 MPa |
These ranges correspond to approximately -1 bar to +1 bar at the low end and up to 700 bar / 10,000 psi at the high end.
The broad selection allows users to choose a gauge whose full-scale value is appropriately matched to the device under test.
Uncertainty down to 0.02% FS
A key feature of the Fluke 2700G is its high measurement performance.
Fluke specifies uncertainty of up to:
±0.02% of full scale, k = 2
for positive gauge pressure measurements.
For the vacuum portion of the bidirectional models, europascal lists an uncertainty of:
±0.05% of full scale.
The uncertainty specification includes multiple error components and is therefore more meaningful for calibration work than a simple resolution specification alone.
Designed as a Reference Pressure Gauge
The Fluke 2700G is designed to serve as a pressure reference within a comparison calibration system.
A typical setup consists of:
Pressure source → Fluke 2700G → Device Under Test
Both the reference and the DUT are connected to the same pressure source. The desired pressure is generated, allowed to stabilize and then the indication of the DUT is compared with the reference value.
This makes the Fluke 2700G suitable for calibrating:
- Analog pressure gauges
- Digital pressure gauges
- Pressure sensors
- Pressure transmitters
- Pressure switches
- Process pressure instrumentation
europascal specifically presents the 2700G as a reference gauge for professional comparison calibration.
Suitable for Pneumatic and Hydraulic Calibration
Depending on the selected pressure range, the Fluke 2700G can be used for pneumatic or hydraulic pressure calibration.
The lower-pressure models are particularly suitable for pneumatic measurements, while the high-pressure models can be used in hydraulic applications with compatible media.
This allows one product family to cover a broad range of applications from vacuum and low gauge pressure to demanding high-pressure calibration up to 700 bar.
Media Compatibility
Media compatibility depends on the selected model.
According to europascal and Fluke:
2700G-BG100K and BG200K
are intended for clean, dry, non-corrosive gases.
2700G-BG700K to BG7M
can be used with gases and liquids compatible with stainless steel 316.
2700G-G20M to G70M
can be used with non-flammable, non-toxic, non-explosive and non-oxidizing gases or liquids compatible with stainless steel 316.
This broad media compatibility allows the 2700G series to be used in both pneumatic and hydraulic calibration systems.
21 Standard Pressure Units
The Fluke 2700G supports 21 standard pressure units.
Examples include:
- bar
- kPa
- MPa
- psi
- inH₂O
Fluke also allows one custom pressure unit to be defined through the administrator menu.
This is particularly useful in international calibration laboratories where different units may be required depending on the device under test or industry.
Adjustable Measurement Functions
The user interface allows several measurement parameters to be configured.
These include:
- Sampling rate
- Tare value
- Damping
- Automatic power-off time
- Min and Max reset
- Remaining battery life indication
Fluke also provides an administrator menu that can be used to lock selected functions and prevent accidental changes during routine calibration work.
This is useful when several operators use the same reference pressure gauge.
5.5-Digit Display
The Fluke 2700G incorporates a:
5.5-digit digital display
together with a:
20-segment bar graph.
The digital display provides a clear pressure value, while the bar graph gives a quick visual indication of the applied pressure relative to the measuring range.
This combination is useful when approaching pressure points during manual calibration.
Portable Pressure Calibration with 700PTPK and 700HTPK
For mobile calibration, the Fluke 2700G can be combined with the:
Fluke 700PTPK
and:
Fluke 700HTPK
pressure pump kits.
These pump kits allow a portable pressure calibration setup to be assembled around the reference gauge.
This is especially useful for service technicians who need to calibrate pressure instruments directly at their installation location.
Combination with Fluke P5510
For low-pressure pneumatic calibration, the Fluke 2700G can be combined with the Fluke Calibration P5510 comparison test pump.
The P5510 allows pressure and vacuum generation and can be used for calibration tasks up to approximately 20 bar.
The P5500 series connection concept allows the 2700G to be connected hand-tight without requiring PTFE tape.
This simplifies setup and reduces the amount of time required to exchange reference gauges.
Combination with P5513
For higher pneumatic pressures, the Fluke P5513 can be used together with the Fluke 2700G.
The P5513 extends pneumatic comparison calibration up to approximately 200 bar, making it suitable for use with higher-range 2700G models.
This allows laboratories to cover a wide pneumatic pressure range while still using the same 2700G product family.
Combination with P5514 and P5515
For hydraulic applications, the 2700G can also be combined with Fluke Calibration comparison pumps such as the:
P5514
and:
P5515.
These pumps are suitable for high-pressure hydraulic calibration and allow high-range 2700G models to be used as precision reference gauges.
Fluke explicitly lists the P5510, P5513, P5514 and P5515 as compatible calibration pumps for the 2700G.
Compact Design
The Fluke 2700G has compact dimensions of approximately:
12.7 × 11.4 × 3.7 cm
and weighs approximately:
0.56 kg.
This makes the gauge suitable not only for permanent laboratory use but also for mobile calibration work.
Its compact dimensions also allow it to be installed conveniently on comparison pumps or test benches.
Battery Operation
The Fluke 2700G is powered by:
3 × AA alkaline batteries.
europascal specifies a typical battery operating time of approximately:
75 hours.
Standard AA batteries simplify field operation because replacements are widely available.
Battery operation also eliminates the need for a mains power supply during mobile calibration tasks.
Pressure Connection
The standard test connection is:
1/4 inch NPT male.
Adapters for:
1/4 inch BSP
and:
M20 × 1.5
are included.
This provides flexibility when connecting the reference gauge to different pressure calibration systems.
Technical Highlights
| Feature | Fluke 2700G |
|---|---|
| Device type | Digital Reference Pressure Gauge |
| Number of ranges | 9 |
| Minimum range | -100 to +100 kPa |
| Maximum range | 0 to 70 MPa |
| Maximum pressure | 700 bar |
| Maximum pressure | 10,000 psi |
| Uncertainty | Up to ±0.02% FS, k = 2 |
| Vacuum uncertainty | Up to ±0.05% FS |
| Pressure units | 21 + custom unit |
| Display | 5.5 digit |
| Bar graph | 20 segments |
| Connection | 1/4 in NPT male |
| Included adapters | 1/4 in BSP, M20 × 1.5 |
| Power supply | 3 × AA alkaline batteries |
| Battery life | Approx. 75 h |
| Dimensions | Approx. 12.7 × 11.4 × 3.7 cm |
| Weight | Approx. 0.56 kg |
| Compatible pumps | 700PTPK, 700HTPK, P5510, P5513, P5514, P5515 |
These specifications are based on current Fluke and europascal product information.
Typical Applications
The Fluke 2700G is particularly suitable for:
- Reference pressure measurement
- Comparison calibration
- Digital pressure gauge calibration
- Analog pressure gauge calibration
- Pressure sensor calibration
- Pressure transmitter calibration
- Pneumatic pressure calibration
- Hydraulic pressure calibration
- Vacuum and gauge pressure measurements
- Laboratory calibration
- Workshop calibration
- Mobile field calibration
- Quality assurance
- Production testing
- Pressure metrology
- Service and maintenance
Calibration by europascal
A reference pressure gauge such as the Fluke 2700G should be calibrated regularly to maintain reliable metrological traceability.
europascal provides professional calibration services for reference gauges, digital pressure gauges, pressure sensors, pressure transmitters and other pressure measurement instruments.
For traceable pressure calibration, visit the europascal Calibration Service.
europascal can also support the selection of the appropriate 2700G pressure range and the design of complete pneumatic or hydraulic comparison calibration systems.
Why Choose the Fluke 2700G?
The Fluke 2700G combines high measurement performance with a broad range of pressure versions and excellent portability.
With uncertainty down to ±0.02% FS, the gauge is suitable as a reference instrument for professional pressure comparison calibration.
Nine available ranges allow users to cover applications from vacuum and low gauge pressure up to 700 bar / 10,000 psi.
The ability to select from 21 standard pressure units, configure sampling rate and damping, use tare and Min/Max functions and define a custom engineering unit provides flexibility for everyday calibration work.
Compatibility with Fluke Calibration pump systems is another major advantage. By combining the 2700G with a suitable 700PTPK, 700HTPK, P5510, P5513, P5514 or P5515 pressure source, users can create complete manual calibration stations for mobile or laboratory applications.
The compact battery-powered design also makes the Fluke 2700G suitable for service technicians who need a reliable reference pressure gauge outside the laboratory.
europascal supports professional users in selecting suitable pressure calibration equipment and provides traceable calibration services for pressure instruments.
Further products from Fluke Calibration can be found here.
Manufacturer information about the Fluke 2700G can be found on the official Fluke website.
