Fluke 700G is a rugged precision digital pressure gauge series developed for fast, accurate and reliable pressure measurement in field service, calibration laboratories, maintenance environments and industrial pressure applications. The series covers a very broad pressure range from approximately ±20 mbar up to 690 bar / 10,000 psi, with multiple gauge, absolute and reference-class versions available. Fluke

The Fluke 700G combines a compact handheld design with strong measurement performance and a robust protective housing. Standard models offer measurement uncertainty of 0.05% of full scale, while selected reference-class 700RG models achieve uncertainty down to 0.04% of reading. This makes the series suitable for routine pressure verification as well as more demanding comparison measurements. Fluke

The 700G family is also designed to work as part of a complete pressure calibration system. In combination with the Fluke 700PTPK pneumatic pump kit or the Fluke 700HTPK hydraulic pump kit, the gauge can form a portable pressure generation and measurement solution for field calibration. europascal likewise presents the 700G series together with these pump kits as a complete calibration solution. Fluke

In addition, the Fluke 700G can log more than 8,493 pressure readings when used with the optional 700G/TRACK software. This allows pressure data to be transferred to a PC for review, documentation and further analysis. Fluke

For professional calibration and metrological traceability, visit the europascal Calibration Service. europascal also offers professional support for Fluke Calibration pressure products and is an authorized service center for Fluke Calibration pressure and flow equipment in the EMEA region. Europascal

Your Benefits at a Glance

• Precision digital pressure gauge series
• Pressure ranges from approximately ±20 mbar to 690 bar
• Maximum range up to 10,000 psi
• Standard uncertainty of 0.05% FS
• Reference-class versions with uncertainty down to 0.04% of reading
• Gauge-pressure versions
• Absolute-pressure versions
• Reference-class versions
• 23 model variants
• Bright backlit display
• 5.5-digit digital indication
• 20-segment bar graph
• Data logging of more than 8,493 readings
• Optional 700G/TRACK software
• Rugged protective holster
• IP67 housing
• ATEX and CSA approvals for selected hazardous-area applications
• Compatible with pneumatic and hydraulic pressure pumps
• Suitable for field pressure calibration
• Suitable for laboratory calibration
• Battery-powered operation
• Up to approximately 2,000 hours of battery life at low measurement rate
• Three-year warranty

Wide Pressure Range up to 690 bar

The Fluke 700G series covers a very broad span of pressure measurement applications.

Fluke currently lists a total of 23 digital gauges, with ranges beginning at very low differential and gauge pressure and extending up to:

690 bar

or:

10,000 psi. Fluke

This allows users to select a measuring range that is closely matched to the device under test.

For calibration applications, selecting the correct full-scale range is important because the uncertainty of many 700G models is specified as a percentage of full scale.

Standard Accuracy of 0.05% FS

The standard Fluke 700G models provide a specified measurement uncertainty of:

0.05% of full scale for one year. Fluke

This performance makes the gauges suitable for a wide range of industrial calibration and verification tasks.

Typical devices under test include:

• Analog pressure gauges
• Digital pressure gauges
• Pressure transmitters
• Pressure sensors
• Pressure switches
• Process pressure instrumentation

For higher-accuracy work, reference-class versions are also available.

Reference-Class 700RG Models

The Fluke 700RG versions provide improved measurement performance.

Fluke specifies measurement uncertainty as low as:

0.04% of reading

for the reference-class models. Fluke

Available reference-class ranges extend from approximately:

-0.97 to 2 bar

up to:

690 bar / 10,000 psi. Fluke

These models are especially useful for comparison calibration where the reference gauge should provide significantly better measurement performance than the device under test.

Gauge, Absolute and Reference Versions

The Fluke 700G family includes several measurement types.

Gauge Pressure Models

Standard gauge-pressure models cover low to very high positive pressure ranges and are intended for measurements referenced to atmospheric pressure.

Absolute Pressure Models

The 700GA models provide absolute-pressure measurement.

Current variants include ranges such as:

• 1 bar absolute
• 2 bar absolute
• 6.9 bar absolute
• 20 bar absolute. Fluke

Reference-Class Models

The 700RG models provide improved uncertainty and are aimed at more demanding reference applications.

This variety allows the user to select the pressure type and measurement performance appropriate for the application.

Data Logging of More Than 8,493 Readings

The Fluke 700G series offers internal data logging capability.

Fluke specifies storage for more than:

8,493 pressure readings. Fluke

When combined with the optional 700G/TRACK software, logged data can be transferred to a PC.

The software allows the user to configure:

• Logging interval
• Duration
• Engineering units
• Remote logging
• Data transfer
• Measurement export. Europascal

This makes the 700G useful not only for spot measurements but also for monitoring pressure over time.

Complete Calibration Solution with 700PTPK

For pneumatic calibration, the Fluke 700G can be combined with the:

Fluke 700PTPK pneumatic pressure test kit.

Fluke specifies pressure generation up to approximately:

40 bar / 600 psi

with the pneumatic pump kit. Fluke

This combination provides a portable system for generating pressure and measuring the reference value with the 700G.

A typical setup consists of:

700PTPK → Fluke 700G → Device Under Test

This configuration is particularly suitable for field calibration of pressure gauges and transmitters.

Hydraulic Calibration with 700HTPK

For higher pressures, the 700G can be combined with the:

Fluke 700HTPK hydraulic pressure test kit.

Fluke specifies pressure generation up to:

690 bar / 10,000 psi. Fluke

This enables high-pressure hydraulic calibration using selected 700G models.

europascal also lists the 700HTPK as a compatible complete pressure test solution with the Fluke 700G series. Europascal

Pressure Media Compatibility

Media compatibility depends on the selected pressure range.

For the lowest pressure versions, Fluke specifies use with:

clean, dry and non-corrosive gases.

For models up to approximately 100, 300, 500 and 1,000 psi, media may include:

gases and liquids compatible with 316 stainless steel.

For models above 1,000 psi, Fluke specifies:

non-flammable, non-toxic, non-explosive and non-oxidizing gases or liquids compatible with 316 stainless steel. Fluke

This wide media compatibility allows the 700G family to cover both pneumatic and hydraulic applications.

Rugged IP67 Housing

The Fluke 700G is designed for demanding field use.

Fluke specifies:

IP67 protection. Fluke

The rugged housing and protective holster help protect the instrument against mechanical damage, moisture and contamination during daily service work.

This makes the gauge suitable for technicians who regularly move between industrial installations and calibration locations.

Hazardous-Area Approvals

Selected versions of the Fluke 700G are approved for operation in hazardous areas.

Fluke lists:

CSA Class 1, Division 2, Groups A-D

and:

ATEX II 3 G Ex ic IIB T6 Gc. Fluke

This allows suitable models to be used in certain hazardous industrial environments where normal electronic pressure gauges may not be permitted.

The exact certification of the selected model should always be checked before use.

Bright Backlit Display

The Fluke 700G includes a bright backlit display for improved readability under different lighting conditions.

The display uses:

5.5 digits

and includes a:

20-segment bar graph covering 0 to 100% of range. Fluke

The numerical display provides the exact measured pressure, while the bar graph gives a quick visual indication of the current pressure relative to full scale.

Compact Dimensions

The 700G is compact enough for portable field use.

Fluke specifies dimensions of approximately:

12.7 × 11.4 × 3.7 cm

and a weight of approximately:

0.56 kg with protective holster. Fluke

This makes the digital pressure gauge easy to carry with other calibration equipment.

Long Battery Life

The Fluke 700G operates from:

3 × AA alkaline batteries.

Fluke specifies battery life of approximately:

1,500 hours without backlight in continuous operation

or up to:

2,000 hours at a low measurement rate. Fluke

This long battery life is especially useful for mobile service work and permanent pressure monitoring applications.

Pressure Connection

The standard pressure connection is:

1/4 inch NPT male. Fluke

Fluke also supplies an adapter from:

1/4 inch NPT to 1/4 inch ISO. Fluke

This provides convenient integration into common pressure calibration systems.

Technical Highlights

These specifications are based on current Fluke product information and the europascal 700G datasheet. Fluke

Typical Applications

The Fluke 700G is particularly suitable for:

• Field pressure calibration
• Digital pressure gauge calibration
• Analog pressure gauge calibration
• Pressure transmitter calibration
• Pressure sensor testing
• Pressure switch verification
• Pneumatic pressure measurement
• Hydraulic pressure measurement
• Reference pressure measurement
• Pressure data logging
• Process instrumentation
• Industrial maintenance
• Calibration laboratories
• Quality assurance
• Production testing
• Mobile calibration
• Pressure metrology

Calibration by europascal

Reliable pressure measurements require regular calibration and metrological traceability.

europascal provides calibration services for digital pressure gauges, reference gauges, sensors, transmitters, pressure controllers and other pressure measuring equipment.

For professional calibration, visit the europascal Calibration Service.

europascal also provides support for selecting suitable Fluke pressure gauges, pneumatic and hydraulic pressure pumps and complete calibration solutions.

Why Choose the Fluke 700G?

The Fluke 700G combines broad pressure coverage, reliable measurement performance and rugged construction in a portable digital pressure gauge.

With standard uncertainty of 0.05% FS, reference-class versions down to 0.04% of reading, and ranges up to 690 bar, the series covers a very wide spectrum of calibration tasks.

The broad product family allows users to select gauge, absolute or reference-class instruments and match the pressure range closely to the application.

Data logging for more than 8,493 readings further increases the usefulness of the gauge for pressure monitoring and documentation.

Combined with Fluke 700PTPK or 700HTPK pressure pump kits, the 700G becomes part of a complete portable pressure calibration solution for pneumatic and hydraulic applications.

Its IP67 housing, rugged protective holster, hazardous-area approvals on selected models and long battery life make the Fluke 700G particularly well suited for field calibration and industrial maintenance.

europascal supports professional users in the selection, service and calibration of Fluke pressure instrumentation. europascal is also an authorized Fluke Calibration service center for pressure and flow products in the EMEA region. Europascal

Further products from Fluke Calibration can be found here.

Manufacturer information about the Fluke 700G can be found on the official Fluke website.

Download Datasheet